What we can do with your car infotainment system ?
The removal of memory chips from circuit boards if board become damaged and read memory chip.
Performing the non-destructive In-System Programming (ISP) or use connection to service pins to recover data for decoding in forensic software like a Berla
Recover data use Chip-Off data acquisition techniques for vehicles and systems that may have been damaged due to collision, fire, or water damage.
We also can solder any type of chip back to logic board so it remain in working condition and can be installed back to car for further use.
We can repair car infotainment system or car CPY main board if it necessary.
In our data recovery laboratory not only data from hard drive or SSD can be restored, we also can recover read and analyze any type vehicle memory chip like:
WE CAN READ FLASH MEMORY CHIPs BASED ON:
NAND, NOR, MIRRORBIT, Eclipse, EMMC, MCP, UFS, FLASH CARDS, SD, mSD e-PCIE, e-MCP and other...
We can read memory chip from such socket BGA standards like: BGA/FBGA:32,63,64, 95,100,128,192,152,162,186,221,252,254,
SOP,TSOP and other...
Also possible read data from small memory NOR chips like:
USON 5,6,7,8 / WSON 6,7,8 from 1,2 x 1,2mm till 8x10 мм.
DFN 4,8,TSSOP, SOP, WLCSP 8, 12,14,16,21
XBGA 4,8,
SOT23-3,4,5,6,7,8
SOP 8,16
BGA 16,24,48,63,64
And many many other! Please contact to us.
Last 2024 June our Car chip reading
with Special NAND BGA 162 for Lexus and Mazda
Micron chip with 'JY990' printed on it and Jeju Semiconductor
Corp. chip with 'JSFCBB3YH3BBG' printed on it
We have all adapter for this hybrid chips!
Now also possible also restore data from "Autoliv" Airbag safety systems wich keep data from internal logic board and sensors such as airbags, seatbelts, steering wheels, and passive safety electronics. It also may keep collision data and fault logs from pedestrian protection system.
Also many other sockets and connectors. and evemn without standards connectors! We can read full image memory file use socket, board pin connection or direct CPU, JTAG or System interface reading method from car infotainment system and then use log and telemetry data from car storage flash memory to get some evidence for forensic investigation.
We can check car system almost any cars that have crashed, stolen or burned down. We can read the data from the car's on-board computer and analyze information about what exactly happened and who is to blame for the arson or car accident.
This can be useful for insurance companies or for litigations.
We get many forensic equipment and information on this page will continue to be updated more soon this 2024 year.
How it works in generally.
In many cases we can read any memory chip from your vehicle board use JTAG, Pinpoint connection, system socket, on board software connection, and we leave the logic board in working condition and it can be used again. If the board is cracked or destroyed by fire or water we will have to remove the memory chip and read it separately. We can read the memory chip if it is also partially damaged or chipped (direct NAND reading option). If we get an unknown board we can also find out pin connection or remove the memory chip, examine the connection and then read it and install it back. We have a very large database of device pinouts and technical documentation from manufacturers.
Sometimes it is not possible to leave the board in working condition if it is covered with glue or its modules are poorly designed and require full disassembly or research. But we still try to leave everything in working condition as possible.
Questions - call us.
+1(403) 889-7071
